Electric bending machine, bending machine, electric hydraulic bending machine, hydraulic bending machine, electric bending machine, bending machine, electric hydraulic bending machine, hydraulic bending machine aluminum row bending machine, copper row bending machine, copper and aluminum row bending machine (Electric, manual aluminum row bending machine, copper row bending machine, copper and aluminum row bending machine (various models)
Electric bending machine, bending machine, electric hydraulic bending machine, hydraulic bending machine , Bending machine
Electric bending machine, bending machine, electro-hydraulic bending machine, hydraulic bending machine/Electric hydraulic bending machine_
Electric bending machine
> Product name
< br/> Model specifications
Manual hydraulic bending machine
Manual hydraulic bending machine
Electric manual hydraulic bending machine
Electric manual hydraulic bending machine
Hydraulic Cutting and rowing machine
Manual
Hydraulic cutting and rowing machine
Electric
Hydraulic bending machine electric pump
Electric pump for hydraulic bending machine
Manual pump for hydraulic bending machine
Hand pump
Application of electric bending machine
Electric hydraulic bending machine is suitable for bending aluminum and copper rows , used in industrial and mining enterprises, substations, and power plants, it is an ideal hydraulic tool for bending rows.
Specifications and performance parameters of electric bending machines
, models
, maximum working pressure
, Maximum working stroke
, Bend row range aluminum copper row width,,,,,,
Thickness
, Bending angle
, Bending radius row width
, Fuel tank Capacity
, hydraulic oil grade
, maximum operating force
Electric hydraulic bending machine (manual bending machine, integrated bending machine) adopts high-quality materials and advanced processing technology, with fast speed and It has the characteristics of long trouble-free working time. A new type of tool for bending aluminum and copper rows. It has a reasonable structure, easy operation and safe use.
The structure of the electric bending machine
By It consists of electric pump, high-pressure oil pipe, quick connector, working cylinder, and bending parts (including upper and lower flower plates, plywood die, right-angle die, rollers, templates, etc.). See attached sketch
Electric bending machine Performance characteristics (technical parameters)
> Model
Bending angle
Degree< br/>
Degree
Curved row radius
Row width
Row width
Curved row Thickness
,,,,
,,,,,
Bend row width
,,,< br/>
,,,,,,
Maximum working pressure
Maximum working stroke
Hydraulic oil grade
Template distribution of hydraulic bending machine
Table 2
> Row width
Row thickness
Template radius
Template Thickness
Alternative description
,,,,
,,< br/>
Combined use of row thickness + template
Use template instead of row thickness
,,,,
,,
,,,,
,,
,
,
、
、
,,
,,
How to use the electric bending machine and Precautions
How to use
First put the working cylinder into the hole of the square block and tighten the nut to the bottom. Make the nut and the square stopper close and tighten the butterfly fixing screw. Then, pull back the movable part of the quick connector at the end of the pressure pipe and put it on the working cylinder joint. Relax your hands and return the movable part to its original position. That is to say, fasten it by yourself, and then tighten the oil drain screw on the pump body to start working. Similarly, when the oil drain screw is loosened after the work is completed, the working cylinder will automatically retract.
When bending flat (see picture 1), open the upper flower lever and install the clamping die head into the working cylinder head. According to the thickness of the bent row, select the template to be placed together with the aluminum row or copper row
When vertically bending (see Figure 2) open the upper flower plate, install the right-angle die head into the head of the working oil cylinder, insert two pins in the lower flower wrench hole, then cover the upper flower plate, and install the aluminum row Or the copper row can work if it is placed between the pin and the right-angle die head. The minimum distance between the two right angles is Long bolts and connecting rod plates can work by inserting two pins into them.
, Under any bending conditions according to the standard row width, bending radius and bending angle, the rebound angle can be achieved.
, Roller The column has five slots, which are divided into two ends. The position of one end is from the flower board to the lower opening of the slot. If the other end is used, it must be turned around.
. The oil pump needs to be filled with oil. You can remove the rubber cover at the end of the oil pump. Then unscrew the hexagonal screw to expose the oil pipe and you can refuel.
, The copper platoon must be tempered before it can be used.
,,,, Use a block plate for the bent platoon, and use a plate for the bend.
, electric pump, please refer to the electric pump instruction manual.
, Precautions,
, If empty pumping occurs during use, you can first loosen the oil drain screw on the pump body,
Put the pump Lift it vertically and make a few empty blows with your head down, then tighten the oil drain screw, and you can continue to use it.
. Do not remove the quick connector when there is a load.
This machine Oil is used as the medium, and the oil and the machine must be cleaned and maintained
to avoid clogging or oil leakage, which will affect the use effect.
> Name
Specifications
/>
Manual hydraulic bending machine
Manual hydraulic bending machine
/>
Electric manual hydraulic bending machine
Electric manual hydraulic bending machine
Heilongjiang direct supply DWP-10A hydraulic bending machine Xinlong supply